LiBro-Steel

Rack system. Build-in parts.

LiBro-Steel

Build-in parts are inserted into the rows of holes in the stands. The following is a selection of parts of powder-coated steel sheet which can be retrofitted.

Adjustable shelf have end supports and are folded down at front and back and fitted with a guide for hanging book ends on the underside.

Magazine rack has 4 flaps which can be lifted and pushed-in (DIN A4) as well as a hard transparent plastic cover.

Magazine shelf has 45┬░ inclination and folded-up at the front edge and sides.

The Top is folded down at front and back and fitted with guide for hanging book ends on the underside. The ends are folded down and used for fixing.

Wall rail consists of a U-shaped steel section with rows of holes for adjustable shelves.

Labelling strip for adjustable shelves consists of a self-adhesive plastic sleeve with labelling strip which can be cut to length as required.

Back edge of sheet steel for the book shelf.

Hanging book end for positioning in the groove on the underside of the shelf.

Angled book ends and compartment dividers of sheet steel.

The following material groups are available to choose from: Frame made of steel tube: M(light grey RAL 7035).

Further products on this page: Hokki.

LiBro-Steel