LongTable

Conference and contract tables.

LongTable

Frame consisting of triangular steel-tube bars with a screwed-on, set-back casing frame. Triangular table legs with a chrome-plated aluminium finisher on the outside and with a removable sheet-steel finisher on the inside. Tables from a width of 240 cm with a rectangular perforated-sheet support element in the center. All steel parts powder-coated anthracite. All tables with floor levelling screws.

Table top made of one- or from a width of 350 cm optionally of two-part, veneered chipboard (19 mm) with veneer edge.

Electrification: The supply lead from the floor tank is located in square tables behind the sheet-steel finisher on the inside of the table leg and in rectangular tables in the central support element. Both supply leads can be accessed without tools. A box made of plastic or sheet steel (see table below) with options for accommodating electronic boxes (see accessories) with network and data connections serves as the cable storage compartment. In each case with cable fastenings for strain relief.

Cable outlet (optional), depending on the model, via 1, 2 or 3 generously dimensioned cable flaps in the center of the table.

Equipment (optional): ThinClient holder under the table top.

The following material groups are available to choose from: Frame made of steel: M(chrome-plated); Top veneered: F1.