RoundTable

Conference and contract tables.

RoundTable

Frame consisting of a steel leg/post with a two-part, round sheet-steel finisher and a four-point foot start of powder-coated or chrome-plated rectangular steel tube. A steel plate or from a table diameter of 140 cm a set-back octagonal steel-tube casing frame serves as the table-top carrier. All tables with large base glide elements made of plastic or from a diameter of 200 cm of turned steel. Table-top carrier and leg/post powder-coated.

Table top made of one- or from a diameter of 200 cm of two-part, veneered MDF board with a chamfered board edge.

Electrification: The supply lead is located behind a sheet-steel finisher that can be removed without tools in the center leg/post. A box made of plastic or sheet steel (see table below) with options for accommodating electronic boxes (see accessories) with network and data connections serves as the cable storage compartment. In each case with cable fastenings for strain relief.

Cable outlet (optional), depending on the model, via 1 or 2 generously dimensioned cable flaps in the center of the table.

The following material groups are available to choose from: Frame made of steel: M(arctic, chrome-plated); Top veneered: F1.